Unify OpenStage 15 User Manual

OpenScape Voice functions 149
Temporarily activating anonymous calling for the next
call
If your administrator activated caller ID transmission for your phone, you can de-
activate this setting for the next call as follows:
^ Lift the handset.
j Enter the code (see the table of codes  Page 163).
Z Wait until you hear the confirmation tone or announcement.
j Dial the phone number of the party you want to contact.
Caller ID transmission is reactivated after this call.
Temporarily deactivating anonymous calling for the
next call
If your administrator suppressed caller ID transmission for your phone, you can
enable this setting for the next call as follows:
^ Lift the handset.
j Enter the code (see the table of codes  Page 163).
Z Wait until you hear the confirmation tone or announcement.
j Dial the phone number of the party you want to contact. When you end this call,
caller ID transmission is suppressed once again for the next call.

Unify OpenStage 15 Specifications

General

Display	Yes
Display Lines	2
Keypad	Yes
Speakerphone	Yes
Volume Control	Yes
Wall Mountable	Yes
Headset Port	Yes
Power over Ethernet (PoE)	Yes
Ethernet Port	1
Protocols	SIP
Dimensions	200 x 200 x 90 mm
Weight	0.8 kg