Unify OpenStage 15 User Manual

Individual phone configuration 171
Automatic daylight saving time
The Auto DST setting is provided for information purposes and can only be
changed by your administrator.
z
You can also access this information via the web interface  Page 197.
N Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the user password.
Select and confirm the option shown.
Daylight saving time must be manually set if a No is entered for Auto DST
 Page 170.
Time display format
z
You can also configure this setting via the web interface  Page 197.
N Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown. The format set is displayed.
Select and confirm the time format (12- or 24-hour display).
Select and confirm the option shown.
Settings
User
Date and time?
Settings
User
Locality?
Time format = 24 hours m
12 hours (AM/PM) f
Save & Exit l

Unify OpenStage 15 Specifications

General

Display	Yes
Display Lines	2
Keypad	Yes
Speakerphone	Yes
Volume Control	Yes
Wall Mountable	Yes
Headset Port	Yes
Power over Ethernet (PoE)	Yes
Ethernet Port	1
Protocols	SIP
Dimensions	200 x 200 x 90 mm
Weight	0.8 kg