Unify OpenStage 15

176 Individual phone configuration
Pattern sequence
z
You can also configure this setting via the web interface  Page 197.
Prerequisite: You have choosen the "pattern" ringtone, see  Page 174.
N Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown and then select the required Ringer tone
sequence between 1 and 6 (e.g.
2). You immediately hear the set Ringer melody
with the select Ringer tone sequence. Confirm the selected setting.
Select and confirm the option shown.
Country setting for speakerphone mode
Enter the country setting you prefer for speakerphone mode here (see
 Page 36).
z
You can also configure this setting via the web interface  Page 197.
N Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select the required setting ("standard mode" or "US mode") and confirm.
Select and confirm the option shown.
Settings
User
Audio
Settings?
Ringer tone sequence = 2 f
Save & Exit l
Settings
User
Audio
Settings?
Open listening = Standard mode f
Save & Exit l