Unify OpenStage 15 User Manual

84 Enhanced phone functions
Activating/deactivating Hold and hang-up
This function works in the following call scenarios:
• You have placed a call manually on hold and hang up.
• You are conducting a consultation call and the second call partner hangs up.
• You accepted a second call, and you or the second participant hang up.
You can use "hold and hang up" to determine whether you will be prompted im-
mediately or after a defined time to retrieve the held call.
z
You can also configure this setting via the WBM interface  Page 197.
N Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
In the context menu select and confirm the option shown to activate the function
or
Select and confirm the option shown to deactivate the function again. The func-
tion is always deactivated by default.
Select and confirm the option shown.
This function cannot be used on multi-line phones.
Settings
User
Configuration
Connected calls
Hold and hang-up
Yes
No
Save & Exit

Unify OpenStage 15 Specifications

General

Display	Yes
Display Lines	2
Keypad	Yes
Speakerphone	Yes
Volume Control	Yes
Wall Mountable	Yes
Headset Port	Yes
Power over Ethernet (PoE)	Yes
Ethernet Port	1
Protocols	SIP
Dimensions	200 x 200 x 90 mm
Weight	0.8 kg