Unify OpenStage 15

Enhanced phone functions 99
Allowing "Busy When Dialling"
If you activate this function, an incoming call received while you are performing
dialling is rejected. The caller then hears the busy signal.
z
You can also configure this setting via the web interface  Page 197.
N Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Settings
User
Configuration
Outgoing calls
Busy when dialling = No m
Yes l
Save & Exit l