Unify OpenStage 60 T

Making calls in the team/executive/secretary configuration 111
Deactivating call forwarding
v Open the Program/Service menu  page 36.
Select and confirm the option shown.
S Press the required trunk key.
or
j Enter the required trunk number.
or
R If available. Press the "CFW MULAP" key.
Understanding the LED displays on the sensor key for "CFW MU-
LAP"
S The LED on the "CFW MULAP" key is off - call forwarding is not active for this
trunk.
R The LED on the "CFW MULAP" key lights up - call forwarding is active for this
trunk.
T The LED on the "CFW MULAP" key is flashing slowly, the trunk is the call for-
warding destination.
Forward Line: Off
If you have activated call forwarding for a trunk, a special dial tone sounds
when the line is seized.