58 Enhanced phone functions
Placing an external call on hold
If you have programmed a hold key on your phone page 71, you can put ex-
ternal calls on hold.
Then all other stations can accept the call on the assigned trunk.
Press the "Hold" key.
The message of the relevant trunk appears (e.g. 801) and note the trunk num-
ber.
If available, the LED of the assigned trunk key flashes slowly.
if nec.
\ or s Replace the handset or press the key shown.
Depending on the configuration, this may be necessary so other members can
also pick up the call on hold.
Picking up a held call:
Prerequisite: One or more calls are on hold. The phone is idle.
v Open the Program/Service menu page 36.
Select and confirm the option shown.
or
If the "Retrieve" page 71 key is available, press it.
j Enter the noted trunk number.
or
If there is a "Line:" key available for the relevant trunk, this flashes slowly. Press
the key shown.
To Next Page
Loading...
Need help?
General