Unify OpenStage 60 T

110 Making calls in the team/executive/secretary configuration
Accepting a call for another team member
T Press the flashing DSS key or trunk key.
^ Lift the handset.
or Speakerphone mode.
Forwarding calls on trunks
You can immediately forward internal or external calls to different internal or ex-
ternal telephones (destinations). (External destinations require special configu-
ration in the system).
Activating call forwarding for one trunk activates the function for all trunk keys
assigned to this trunk in your group.
v Open the Program/Service menu  page 36.
Select and confirm the option shown.
S Press the required trunk key.
or
j Enter the required trunk number.
or
S If available. Press the "CFW MULAP" key.
(You have programmed a key with the incomplete "CFW MULAP" function, ex-
cluding the call forwarding type and destination  page 71.)
Confirm,
or
select and confirm the option shown,
or
select and confirm the option shown.
or
1 or 2 or 3 Enter the code.
j Enter the destination phone number.
Confirm.
or
S If available. Press the "CFW MULAP" key. (You have programmed the "CFW
MULAP" key with the call forwarding type and destination,
 page 71.)
Forward Line: On
1=all calls
2=external calls only
3=internal calls only