Unilumin UpadIV2 User Manual

Chapter 3 LED Display Control Setting
26
3.5.1 Setting Coefficients for a New Receiving Card
1） As shown in Figure 3-15, select Topology or List. Select the position of the
replaced receiving card. Click Next:
Figure 3-15 Selecting Area for New Receiving Card
2） Select the coefficient source. Click Browse at Select Database.
Figure 3-16 Obtaining Correction Coefficients for Receiving Card

Unilumin UpadIV2 Specifications

General

Brand	Unilumin
Model	UpadIV2
Category	Monitor
Language	English