Uninet DTF 1000 User Manual

pg. 11 UNINET DTF 1000
PLACEMENT OF PRINTER
This printing system must be placed in a dedicated environment, air-conditioned throughout the
year with a temperature range of 60°F to 80°F, with relative humidity controlled between 42% and
60%, non-condensing, away from direct sunlight sun, dust and dirt, vibration-free, protected from
mechanical impact and / or shock. Daily, accurate maintenance must be performed on this printing
system, using the appropriate accessories and cleaning agents. If you are utilizing a roll feeder with
your printer, be sure that there is ample space for placement of both devices.
INSTALLING THE PRINTER
UNPACKING
Open the box that contains and the printer parts and accessories. With the assistance of a second
person, gently remove the different parts from the box, following the instructions of this manual for
the setup and use of the printer. When lifting heavy objects, be sure to bend and lift with the knees
to avoid any injuries.
KEEP THE ORIGINAL BOX AND PACKAGING FOR FUTURE TRANSPORT!
REMOVE THE PRINTER FROM THE BOX AS SHOWN IN THE IMAGE BELOW.
RIMUOVERE LA STAMPANTE DALLA SCATOLA COME MOSTRATO NELLA FIGURA.
DÉPLACER L’IMPRIMANTE DE LA BOÎTE COMME INDIQUÉ DANS L’IMAGE CI-DESSOUS.
REMOVER LA IMPRESORA DE LA CAJA COMO ESTA INDICADO EN EL DIBUJO SIGUIENTE.
!

Uninet DTF 1000 Specifications

General

Brand	Uninet
Model	DTF 1000
Category	Printer
Language	English