pg. 7 UNINET DTF 1000
GENERAL INFORMATION
PRODUCT DESCRIPTION
The DTF-Model-J printers are based on inkjet technology for use on specialized PET film.
With high print speeds and exceptional resolution, the DTF-Model-J can print high-quality photos
and vector graphics using RIP Software.
To make sure you get all the benefits from your DTF-Model-J please read all the pages that follow.
When performing TEST PRINTS, you can print directly to regular paper, by feeding the
paper just like you would a regular printer.
IDENTIFICATION
Brand: DTF
Model: DTF 1000
GENERAL WARNINGS
• The minimum age of staff / operators is 18 years. Keep away from children or untrained
operators.
• All persons involved in the use and maintenance must have read and understood this
manual.
• Persons under the influence of alcohol or drugs must not operate, or service the product.
• Any faults that may arise should be reported immediately. In case of anomalies that may
affect personal safety, the product must not be used until the fault is cleared.
• During operation and maintenance wear personal protective equipment as instructed and
follow all safety instructions according to the regulations.
To Next Page
Loading...
