71
Color Registration Procedure
If the printer registration is out of alignment, run the Color Registration Procedure
Signs of this would appear as outlines of white or color around your graphic.
IMPORTANT! Remove the white toner and put the printer into the CYMK configuration with the black cartridge in the first
slot and the cyan in the last slot.
Basic Procedure:
1) Press the «Fn» key.
• When a printer is in the power saving mode, press the «POWER SAVE» button to restore from the mode.
2) Press the «3», «0» and «1» on the numeric keypad and then press the «ENTER» button.
3) Make sure that [Execute] is selected and then press the «ENTER» button.
• The message [Color Adjusting] appears in the second line (under [Ready To Print]) of the operator panel display
while adjusting the color registration.
To Next Page
Loading...
