Unipulse F340A - 1. Functional Descriptions; 1-1. Front Panel

1.FUNCTIONAL DESCRIPTIONS
1
1. FUNCTIONAL DESCRIPTIONS
1-1. Front Panel
1-1-1. Status Display
The F340A status is indicated. Setting items are indicated when setting.
HI： This LED turns on when the indicated value is larger than the set value of the
high limit（indicated value ＞ high limit）
Operation of the high limit relay is on.
OK： This LED turns on when the indicated value is smaller than the set value of
the high limit and larger than the set value of the low limit
（low limit ≦ indicated value ≦ high limit）
LOW： This LED turns on when the indicated value is smaller than the set value of
the low limit（indicated value ＜ low limit）
Operation of the low limit relay is on.
PEAK： This LED is blinking when the Peak Hold function is activated.
HOLD： This LED turns on when the indicated value is the held value.
H I OK LOW PEAK HOLD
F340A
DIGITAL
INDICATOR
HOLD
ZERO
ESC
DOWN
SEL
ENT
UP
FNC
SHIFT
CAL
GAIN
STATUS
NUMERICAL
SETTING
DISPLAY
DISPLAY
KEY PAD