Unipulse F340A - 5-4. Digital Offset

5.SETTING OF FUNCTIONS
37
5-4. Digital Offset
This function subtracts a set value from the indicated value. If you make digital offset ,
the value which is obtained by subtracting the set value from the indicated value will be
displayed. This is convenient when you cannot obtain zero by unloading the equipment
for some reason or when you want to give offset.
(Indicated value to be displayed) = (Actual indicated value) - (Digital offset setting value)
1) Select setting mode 1.
2) Select digital offset.
Input an digital offset setting value with and keys
and validate it with key. Press key to put minus sign.
To return to the indicated value display, press key.
FNC
DOWN
Press five times.
ENT
UP
DOWN
SEL
ENT
SHIFT
CAL
ESC
Setting of Digital Offset
Digital Offset (00000 to ± 19999)