5.SETTING OF FUNCTIONS
41
5-8. Motion Detect
Setting of parameters for detecting stable measurement is required.
If the difference between the current indicated value and that of 100msec before fall
within the specified range and the status last for a specified time, indicated values are
assumed stable.
Set
100mSec
Time
Set period
Indicated value
range
Whether the indicated value is stable or not is closely related to
Automatic Printing and High and Low Limit Comparator Mode. For
details, see High and Low Limit Comparator Mode on page 33 and
Automatic Printing on page 46
To Next Page
Loading...
