Unipulse F340A - Page 51

5.SETTING OF FUNCTIONS
42
1) Select setting mode 2.
2 ) Select motion detect（time）.
Use and keys to set the motion detect（time）
then use key to validate the setting.
3) Select motion detect（range）.
Use and keys to set the motion detect（range）
then use key to validate the setting.
To return to the indicated value display, press key.
FNC
SEL
DOWN
Press three times.
ENT
UP
DOWN
SEL
ENT
UP
DOWN
SEL
ENT
ESC
Setting of Motion Detect
Motion Detect(time)
Motion Detect（range）
（00 to 99division）
（0.0 to 9.9s）