15.SPECIFICATIONS
88
15. SPECIFICATIONS
15-1. Analog Section
Bride Voltage DC 10V ± 10％
DC 2.5V ± 10％
Output current of ｍax 30mA
Changable by setting key Pad
Signal input range － 3.0 to +3.0mV/V
Equivalent input calibration range +0.5 ～ +3.0mV/V
Equivalent input calibration error ＜ 0.1％FS（0.5mV/V input）
Zero adjustment range 0 ～± 2.0mV/V
Gain adjustment range +0.5 ～ +3.0mV/V
Analog input signal sensitivity 1μV/count
Accuracy Non-linearity：＜ 0.02%FS（of 3mV/V input）
Zero drift ：＜ 0.5μV/ ℃
Gain drift ：＜ 25ppm/ ℃
A/D converter 100 times /sec. Resolution：16 bits （binary）
Analog filter 4Hz，10Hz，100Hz（Initial），3ｋHz
Changable by setting key pad
Peak hold function （high-speed analog hold system）
Operation response speed：Approx. 1kHz
（Sin wave : 3mV/V input，
Analog Filter.3kHz）
Accuracy： ＜ 0.1%FS
Reset time：＜ 50μS
To Next Page
Loading...
