18
Comfort Feature:
Some Vehicles have a special "COMFORT feature". When you lock the door with the key,
you can keep turning the key in the door for about 5 to 7 seconds and the window will
close directly. If your vehicle has the "COMFORT feature' and you wish for the door to be
locked and the window to be closed automatically at the same time by remote control, you
can set the alarm feature "B-3” "with comfort feature".
ALARM FEATURE: "C" PRORAMMING:
1 ,Turn the Ignition 'switch 'ON/OFF' 3 TIMES and stay in OFF position
2 ,Push the Valet switch 7 times (holding in on the 7th push) until three chirps three
parking flashes and then release the valet switch. You are now in the Alarm feature "C"
programming mode.
3 ,Press and release the transmitter button corresponding to the feature you want to
program.
Press
Transmitter
Button
One Chirp / LED
one pulse
Factory Default
Setting
Two Chirps /
LED two pulses
Three Chirps /
LED three pulses
Four Chirps / LED
four pulses
1
H6/3 Pink Wire =
Two step door
unlock output
H6/3 Pink Wire =
Factory Security
Disarm Signal
Output
H6/3 Pink Wire =
Start Status
Output (Shock
Sensor Bypass)
H6/3 Pink Wire =
Start Status
Output (Shock
Sensor Bypass
20s)
2
H6/6 Brown /
White Wire = (-)
200mA Horn
Output
H6/6 Brown /
While Wire =
Factory Security
Rearm Signal
Output
3
Fahrenheit
display for
Temperature
Celsius display
For temperature
4
Override Without
Password Pin
Code
Override With
Password Pin
Code
5
H6/15 Gray Wire
Channel 3
Output = Pulsed
output
H6/15 Gray Wire
Channel 3
Output = Latched
output
H6/15 Gray Wire
Channel 3 Output
= Latched output
and reset with
ignition "on"
H6/15 Gray Wire
Channel 3 Output
= Timer
programming (set
to any interval
between 1 second
and 2 minutes)
To Next Page
Loading...
Need help?
General
