Unitech UNI-335 Installation Manual

21
programming mode.
3. Press and release the transmitter button corresponding to the feature you want to
program.
Press Transmitter
Button
One Chirp / LED
one pulse Factory
Default Setting
Two Chirps / LED
two pulse
Three Chirps /
LED three pulse
Four Chirps / LED
four pulse
Gasoline Engine
1
Diesel Engine
with Wait-TO-Start
Light (H6/12
White/Green wire
must be
connected)
Diesel Engine
without
Wait-To-Start
Light 10
seconds warm-up
timer
Diesel Engine
without
Wait-TO-Start
Light 15 seconds
warm-up timer
Diesel Engine
without
Wait-To-Start
Light 20
seconds warm-up
timer
2
Constant
parking light
output upon
Remote Start
Flashing parking
light output upon
Remote Start
3
20 minutes run
time
30 minutes run
time
10 minutes run
time
5 minutes run
time
4
Door lock before
start
Door lock after
shut-down
Door lock before
start and Door
lock after
shut-down
Without this
feature
5
Press
button
= Activate Remote
Start.
Press
-
button Activate
Remote Start.
Press +
button = Activate
Remote Start.
6
H6/4 White/Blue
wire
= 1 pulse activate
H6/4 White/Blue
wire
= 2 pulse activate
H6/4 White/Blue
wire
= 3 pulse activate
7
AUTOMATIC
TRANSMISSION
Exit: Turn Ignition to 'ON' position, or leave it for 15 seconds. parking light 5 times will
confirm exit.
SAFE START (Child safety mode)
Factory defaults setting to press the
button once to start the vehicle
Programming this feature to eliminate an accidental remote start,
1. The user presses the transmitter
buttons "twice" within 3 seconds to start the vehicle.
or

Unitech UNI-335 Specifications

General

Brand	Unitech
Model	UNI-335
Category	Controller
Language	English