United Parachute Technologies Vector 3 - Closing the Main Container

VECTOR3MANUAL
MAN‐004REV7.2557/20/2017

ATTACHING THE COLLAPSIBLE PILOT CHUTE

1.Locatethemaincanopy’spilotchutebridle
attachmentpoint.

2.Openthenewcollapsiblepilotchuteand
bridle.

3.Runtheendofthebridleoppositethepilot
chutethroughthegrommetinthetopofthe
maindeploymentbag.Thebridleshouldbe
insertedfromthe
outsidetotheinsideofthe
bag.







4.Pullthebridlethroughthemaindeployment
baggrommetuntilthegrommetissnugagainst
thestopblock(ofthebridle)ontheoutsideof
thebag.












5.Pullthetwofabricloopson
thebridlebackso
theyrestagainstthegrommetontheinsideof
thebag.

6.Attachthepilotchuteandbagtothepilot
chutebridleattachmentpointonthemain
canopy.Passthepilotchuteandbagthrough
theloopedendofthebridle.


 