5.5. Essential Requirements
Generic denomination UR10
Function General purpose industrial robot
Model UR10
Serial number of robot arm
Serial number of control box
Commercial name UR10
5.5 Essential Requirements
The individual robot installations have different safety requirements and the in-
tegrator is therefore responsible for all hazards which are not covered by the
general design of the robot. However, the general design of the robot, includ-
ing its interfaces meets all essential requirements listed in annex I of 2006/42/EC.
The technical documentation of the robot is in accordance with annex VII
part B of 2006/42/EC.
All Rights Reserved
38 UR10
To Next Page
Loading...
