2 l Smatrix Pulse | Installation and Operation Manual
Foreword
Uponor is dedicated to partnering with professionals to
create better human environments. As the leading North
American manufacturer of Engel-method crosslinked
polyethylene (PEX-a) piping and provider of PP-RCT
piping solutions, Uponor is dedicated to offering products,
systems, services, support, and solutions to design, install,
and operate high-performing piping systems.
As part of this support, Uponor publishes the Smatrix
Pulse Installation and Operation Manual for contractors,
engineers, architects, building officials, building managers,
and other individuals interested in radiant heating and
cooling as well as HVAC systems.
Uponor has made reasonable efforts to collect, prepare,
and provide quality information and material in this
manual. However, system enhancements may result in
modification of features or specifications without notice.
Note that Uponor is not liable for installation practices
that deviate from this manual or are not acceptable
practices within the mechanical trades, codes, or
standards of practices. If there are differences between
Uponor recommendations and local code, always follow
the more-restrictive criteria. For example, where Uponor’s
recommendations are more restrictive than the local
code, follow the Uponor recommendations to ensure
the product performs as expected and remains covered
under warranty. For warranty information, visit uponor.com
and search "warranty".
It is the installer’s responsibility to ensure the product,
design, and intended installation are acceptable to the
local authority having jurisdiction (AHJ). Please direct any
questions regarding the suitability of an application to
Uponor Technical Services at 888.594.7726 or
support.UNA@uponor.com.
Warning!
California Proposition 65 Warning: This product
contains chemicals known to the state of
California to cause cancer and birth defects or
other reproductive harm. For more information,
visit P65Warnings.ca.gov.
To Next Page
Loading...
