Uponor Smatrix Pulse - Chapter 3: System Description; System Overview; Hardware Overview

uponor.com l 7
Chapter 3:
System Description
Smatrix Pulse is a wireless zoning control system designed
for radiant heating and cooling installations with the
ability to integrate forced-air heating and cooling.
System Overview
The Smatrix Pulse hardware consists of one or multiple
controllers, an optional Communication Module,
thermostats, actuators, and wireless relays. The Controller
manages the operation of the actuators when the
thermostats detect a demand for heating and/or cooling.
System optimization and settings (for up to four
controllers) is completed through the Smatrix Pulse App
(connected via the Communication Module). The system
can function without the Communication Module but will
reduce the level of system functionality.
Different models of thermostats control heating and
cooling operation. Designed for maximum comfort, the
thermostats communicate with the controller by radio
link. It is possible to mix the different types of Smatrix Pulse
thermostats in the same installation.
Wireless relays provide installation flexibility when needing
to control other heating and cooling devices when running
additional wiring is a challenge.
Hardware Overview
The figure below shows the hardware available for the
Uponor Smatrix Pulse system.
Figure 3-1: Smatrix Pulse hardware
Part
Number
Description Reference
Maximum
per
System
A380265C
Controller (X-265) with
Communication Module
(R-208)
A, F, H 1
A380265A
Controller (X-265) with
Antenna (A-265)
A, G, H 3
A3800169
Digital Thermostat
(T-169)
B
48
A3800161 Mini Sensor (T-161) C
A3801262
Expansion Module
(M-262)
D 4
A3801263 Relay Module (M-263) E 16*
A3801208
Communication Module,
replacement part
F N/A
A3801265
Antenna, replacement
part
G N/A
A3850050
Transformer,
replacement part
H N/A
A3030522
Two-wire Thermal
Actuator for Uponor
EP Heating Manifolds
I 56A3030523
Two-wire Thermal
Actuator for Uponor
TruFLOW™ Classic and
Jr. Valved Manifolds
A3030524
Two-wire Thermal
Actuator for Uponor
Stainless-steel Manifolds
Table 3-1: Smatrix Pulse hardware
*Limit of four (4) A3801263 Relay Modules (M-263) per Controller