Uponor Smatrix Wave User Manual

01 Holiday mode
In this menu a time period can be set well in advance
for when away on holiday. When activated, the timer
attempts to reduce the system energy need by setting a
different setpoint temperature for the system.
To change this setting:
1. Press OK and the parameter starts flashing.
2. Use buttons - or + to set the number of days away.
Default: 0d (day)
Setting range: 1 – 44d (days)
3. Press OK to confirm number of days. The
temperature setting starts flashing.
4. Use buttons - or + to adjust the setpoint
temperature during the previously set time period
(holiday).
Default: 17 ˚C
Setting range: 5 – 35 ˚C, 0.5 ˚C increments
5. Press OK to confirm change and to return to the
settings menu.
02 Autobalancing activation
In this menu autobalacing can be activated for the
system.
To change this setting:
1. Press OK and the parameter starts flashing.
2. Use buttons - or + to activate/deactivate.
on = Activated (default)
OFF = Deactivated
3. Press OK to confirm the change and return to the
settings menu.
03 ECO mode setback temperature
In this menu the ECO mode setback temperature for the
analogue thermostats is set.
The setting changes the current setpoints (lowers in
heating, and raises in cooling, with the set value) on the
thermostats, when the system is set to ECO mode.
To change this setting:
1. Press OK and the parameter starts flashing.
2. Use buttons - or + to change the parameter.
Default: 4 ˚C
Setting range: 0 – 11 ˚C, 0.5 ˚C increments
3. Press OK to confirm change and to return to the
settings menu.
08 Display unit
In this menu temperature display unit is set.
To change this setting:
1. Press OK and the parameter starts flashing
2. Use buttons - or + to toggle between Celsius and
Fahrenheit.
DEg ˚C – degrees Celsius
DEg ˚F – degrees Fahrenheit
3. Press OK to confirm change and to return to the
settings menu.
10 Time and date
In this menu time and date is set. This setting is required
to utilise scheduling programs for this thermostat.
Use buttons - or + to change the value. Press the OK
button to set the value and move to the next editable
value.
To change this setting:
1. Press OK and the parameter starts flashing.
2. Set hours.
3. Set minutes.
4. Set 12 h or 24 h display of time.
5. Set day of the week (1 = Monday, 7 = Sunday).
6. Set day of the month.
7. Set month.
8. Set year.
9. Press OK to confirm change and return to the
settings menu.
UK
CZ
DE
DK
EE
ES
FI
FR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
70
UPONOR SMATRIX WAVE/WAVE PLUS · INSTALLATION AND OPERATION MANUAL

Uponor Smatrix Wave Specifications

General

Control	Wireless
Communication	RF 868 MHz
User Interface	Touchscreen
Range	Up to 30m in open space
Battery Life	Thermostat battery life up to 2 years
Operating Temperature	0°C to +40°C