Introduction
Page 3 2. Operation Manual
I
NTRODUCTION
This manual covers the application of the MX19 Self-Propelled Work Platform.
This manual must be stored on the machine at all times.
G
ENERAL
D
ESCRIPTION
WARNING
!
!
DO NOT use the maintenance platform without guardrails properly assembled and in place
Figure 1: MX Series
1. Platform
2. Deck Extension
3. Platform Controls
4. Manual Case
5. Elevating Assembly
6. Chassis
S
PECIAL
L
IMITATIONS
Travel with the platform raised is limited to creep speed range.
Elevating the platform is limited to firm, level surfaces only.
DANGER
! !
The elevating function shall ONLY be used when the work platform is level and on a firm surface.
The work platform is NOT intended to be driven over uneven, rough, or soft terrain.
1
2
3
4
5
6
To Next Page
Loading...
