Installation
01/21 FlowTimer+ Set 19
In order to protect the solenoid valve from malfunctions
due to contamination, care must be taken during
installation to clean the processed materials carefully;
in particular, it must not be possible for metal chips or
sealing materials to be flushed into the valve interior.
6.3.2 Installation position pressure boosting
The FlowTimer+ system must always be installed downstream of a
booster set (or domestic waterworks) in the direction of flow!
A backflow preventer or KFR valve must be installed
between the booster set and the FlowTimer+.
Fig. 6.3.2: FlowTimer+ and pressure boosting system
To Next Page
Loading...