Decommissioning
01/21 FlowTimer+ Set 48
11 Decommissioning
When FlowTimer+ is taken out of service, the
installation is no longer monitored.
In the event of malfunctions or leaks, the water supply is
no longer shut off.
If the FlowTimer+ system is not to be used for a longer period of
time:
Unplug power supply
A function test must be carried out when the device is put
back into operation.
Start with point 8.2 (Checking the tightness) and then
work your way through each of the subsequent tests and
checks.
The FlowTimer+ system is no longer required:
Completely remove the FlowTimer+ system to avoid the
possibility of interference and contamination of the installation.
To Next Page
Loading...
Need help?
General