UseTECH FlowTimer+ - 2 Technical Data; Electrical Data; Fluidic Data; Environmental and Climatic Conditions

Technical data
01/21 FlowTimer+ Set 7
2 Technical data
2.1 Electrical data
 Input voltage: 100 - 240 V~
 Power consumption: Ø max. 6 Watt
 Frequency: 50 - 60 Hz
 Connection: Euro plug power supply
2.2 Fluidic data
 Inlet pressure: 1 - 10 bar
 Kv- value (valve): 8.0 / 24.0 m³/h (Std./XL version)
 Gasket material: EPDM
 Material: Eco Brass / Stainless Steel
 Connection: G ¾ / G1 ½ " IG (Std./XL version)
2.3 Environmental and climatic conditions
 Ambient temperature: +5°C - 40°C
 Media temp. (drinking water):+5°C - 30°C
 Protection class: IP20
 Place of use: only suitable for indoor use
2.4 Lifetime
 The function of FlowTimer+ must be checked by a specialist at
the specified intervals (see also chapter 10.3.).
 If the fluidic part of the unit shows a fault due to wear, this is
indicated by means of the control electronics by an error case
from the entire system (incl. downstream piping system).