Troubleshooting, maintenance
01/21 FlowTimer+ Set 36
10 Troubleshooting, maintenance
Power outage
In the event of a power failure, the FlowTimer+ opens
automatically and connects the downstream piping
system to the utility.
The monitoring function is then no longer given!
Tips:
For additional monitoring of the mains supply, a smartphone with
alarm app or power failure app can be used, which alerts via Wifi
or GSM.
In case of poor power security (e.g. abroad), a small inexpensive
UPS from the PC accessories market can be connected upstream
of the FlowTimer+ set for additional security.
10.1 No display
If FlowTimer+ does not display a status, make sure that the power
supply is working and that the plug-in power supply unit is plugged
in. If there is still no display, restart the system:
Unplug the power supply and wait approx. 30 seconds
Plug in the power supply again
The status display shows the restart of the system
Possible cause
A fault in the voltage supply has switched off the FlowTimer+. If this
error occurs repeatedly, consult a specialist.
To Next Page
Loading...