Operation and function
01/21 FlowTimer+ Set 30
9.1.3 Bypass mode
In order to still ensure a water supply during a power failure or
troubleshooting, the system can be deactivated for this period of
time.
Unplug the power supply unit (1) from the socket or
disconnect the power supply.
In bypass mode, the installation is no longer monitored.
After troubleshooting, the power supply must therefore be restored
immediately.
Tips:
A smartphone with an alarm app or power failure app can be used
to monitor the mains supply, which alerts via Wifi or GSM.
In case of poor power security (e.g. abroad), we recommend to
connect a small inexpensive UPS (uninterruptible power supply)
from the PC accessories market in front of the FlowTimer+ set.
By means of a radio-controlled socket with feedback, a socket timer
or one of our Smart Home interfaces, the bypass mode can be
activated simply by switching off the power supply in case of an
intended longer water withdrawal, e.g. garden watering.
To Next Page
Loading...
Need help?
General