6-24
Sending > Specifying Destination
5
Confirm the information.
Check the information. Change the information as needed by pressing the item in question.
When specifying a computer or server port number as the destination, press [Port] and enter
the port number. You can enter a number from 1 to 65,535 with a maximum of 5 digits.
Confirm the connection status.
Connected. appears when connection to the destination is correctly established. If Cannot
connect. appears, review the entry.
To enter multiple destinations, press [Next Destination] and enter the next destination. You can
specify a combined total of up to 5 FTP and SMB destination folders.
You can register the entered information in the Address Book by pressing [Menu] and then
[Add to Address Book].
6
Accept the destinations.
Destinations can be changed later. Refer to Checking and Editing Destinations on page 6-25.
GB0128_00
Folder - Confirmation
PC001
10:10
Cancel
Ready to send.
Path
Port
Login User Name
Host Name
pc001\scannerdata
139
< Back
1/2
OK
abcdnet\james.smith
Menu
Use [ ] or [ ] to scroll up and down.
Menu
Connection Test
10:10
Close
Next Destination
Add to Address Book
1/1
Folder - Confirmation
PC001
10:10
Cancel
Ready to send.
Path
Port
Login User Name
Host Name
pc001\scannerdata
139
< Back
1/2
OK
abcdnet\james.smith
Menu
GB0128_00
GB0020_00
2
1
GB0128_00
Folder - Confirmation
PC001
10:10
Cancel
Ready to send.
Path
Port
Login User Name
Host Name
pc001\scannerdata
139
< Back
1/2
OK
abcdnet\james.smith
Menu
To Next Page
Loading...
