Utax 206ci

5-9
Printing > Printing Data Saved on the Printer
Proof and Hold
Proof and Hold stores the print data which is printed by using the printer driver as a Proof and Hold Print job.
Refer to the Printing System Driver User Guide on how to print a job as Proof and Hold Print job using the printer driver.
For details, refer to RAM Disk Setting on page 9-23.
Setting the Number of Stored Jobs
To maintain free space on the RAM disk, you can set the maximum number of stored jobs.
1
Display the screen.
2
Enter the maximum number of stored jobs.
You can enter any number between 0 and 50.
NOTE
RAM disk mode must be enabled.
NOTE
If you enter a value of 0 (zero), you cannot use the Proof and Hold function.
System Menu/Counter.
System Menu
Send
10:10
Document Box
FAX
Favorites/Application
3/5
Document Box
10:10System Menu/Counter.
Job Box
Polling Box
Sub Address Box
< Back
1/1
Quick Copy Job Retention
10:10System Menu/Counter.
Deletion of Job Retention
< Back
1/1
32job(s)
Off
Document Box - Job Box
1
GB0054_02
GB0290_00
4
GB0310_00
3
2
GB0311_00
Job Box - Quick Copy Job Retention
10:10System Menu/Counter.
(0 - 50)
Cancel
job(s)
OK
1
2