Why can't I duplex print on my Utax P-C3570DN?
If the Utax printer displays 'Cannot duplex print on this paper', it means you're trying to duplex print with a paper size or type that isn't supported for duplex printing. Press [OK] to print on only one side of the paper.
What to do if Utax P-C3570DN Printer prints status page but not computer jobs?
If the Utax printer prints a status page but not jobs from the computer, first, ensure both ends of the printer cable are securely connected. Try replacing the printer cable or the interface cable. Second, if the issue persists, try printing a different file or using another print command to check program files and application software. If the problem only occurs with a specific file or application, review the printer driver settings for that application.
Why does my Utax printer say to disconnect power cord and connect to multi purpose feeder?
If the Utax printer displays 'Disconnect the power cord from the machine and connect it to the multi purpose feeder', it means that the optional paper feeder PF-510 is not connected to a power source while 'COATED' paper type is selected. Connect the feeder to a power source via the printer.
What to do if my Utax P-C3570DN says 'Paper jammed'?
If the Utax printer displays 'Paper jammed in ############', it means a paper jam has occurred. The location of the jam is indicated by the # symbols. For detailed instructions on how to remove the jammed paper, consult the 'Clearing Paper Jams' section on page 6-14.
What causes full single-color printouts on Utax printer?
If the Utax printer displays 'Full single-color printout', check that the main charger unit is correctly installed by opening the left cover.
Why is my Utax P-C3570DN Printer emitting steam?
If your Utax printer is emitting steam from the top tray area, it's likely due to low room temperature or damp paper. The heat produced during printing causes moisture in the paper to evaporate, which can appear as steam. This is generally not a problem, and printing can continue. If concerned, increase the room temperature or use newer, drier paper.
How do I fix 'Memory is full' error on Utax printer?
If the Utax printer displays 'Memory is full. Print job cannot be processed completely', it means the amount of data sent to the printer exceeds its internal memory. You can try adding more memory to the printer. Press [OK] to continue printing, or press [Cancel] to stop the job. If Auto Error Clear is enabled, printing will automatically resume after a set time.
What does 'Check cassette #' mean on my Utax P-C3570DN?
If the Utax printer displays 'Check cassette #', it means a paper lift error has occurred in the specified paper source's cassette. To solve this, pull out the indicated cassette (either a paper cassette or an optional paper feeder) and check that the paper is loaded correctly. Note that if this error occurs repeatedly, the message 'Call service' will be displayed.
How to resolve 'Cassette# not loaded' error on Utax P-C3570DN?
If the Utax printer displays 'Cassette# not loaded', it means the corresponding paper cassette is not installed. Install the cassette; the cassette number can be 1 (topmost) to 5 (bottom).
What to do if Utax P-C3570DN shows 'Close left cover'?
If the Utax printer displays 'Close left cover', it indicates that the left cover of the printer is open. To clear the message, simply close the left cover.
General| Print Technology | Laser |
|---|---|
| Print Speed (Black, A4) | 35 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | 150, 000 pages |
| Standard Paper Capacity | 500 sheets |
| Duplex Printing | Yes |
| Standard Paper Tray(s) Capacity | 500 sheets |
| Multi-Purpose Tray Capacity | 100 sheets |
| Maximum Output Capacity | 250 sheets |
| Internal Memory | 1 GB |
| Operating Systems Compatibility | Windows, macOS, Linux |
| Maximum Paper Size | A4 |
| Connectivity | USB, Ethernet |
| Standard Printer Languages | PCL, PostScript, PDF, XPS |
| Display | LCD |
| Mobile Printing Technologies | Apple AirPrint, Google Cloud Print |
Information about the printer being a Class 1 laser product and safety measures.
Conformance to laser product safety standards (DHHS, IEC/EN).
Details the laser warning label located inside the printer for user safety.
Precautions regarding the printer's installation environment and location selection.
Additional safety guidelines for printer installation, including power and ventilation.
Specific warnings and advice for operating the printer safely, covering electrical shock and damage.
Identifies and describes the parts located on the front of the printer.
Identifies and describes the parts located on the left side of the printer.
Identifies and describes the internal components of the printer.
Identifies and describes the parts located on the rear of the printer.
Describes the printer's control panel, including its display and keys.
How to configure network settings like IP address, subnet mask, and protocols.
Managing printer settings and configurations remotely via a web browser.
Step-by-step instructions for installing the printer driver software on a computer.
How to print documents from various software applications using the printer driver.
Basic advice on paper selection, handling, and its importance for printer performance.
Guidelines for choosing appropriate paper, considering condition, composition, and sizes.
Information on using special paper types like transparencies, labels, and envelopes.
How to set the paper type for different paper sources for optimal printing.
Step-by-step instructions for loading paper into the printer's cassette and MP tray.
Specifications and handling instructions for printing on transparency sheets.
Guidelines for printing on adhesive labels, including structure and specifications.
Configuring the printer's network connection, protocols, and IP settings.
Setting up security functions to protect printer operations and print data.
Managing job accounting settings, including account creation and limits.
Setting up administrator ID and password for accessing and managing printer settings.
Adjusting print quality and performing printer maintenance procedures.
Configuration options for TCP/IP network protocols, including IPv4 and IPv6.
How to configure DHCP for automatic IP address assignment on the network.
Manually setting the printer's IP address for network configuration.
Configuring security settings for various network protocols used by the printer.
Selecting the encryption method (AES, DES, 3DES) for SSL server communication.
Enabling or disabling the Job Accounting feature for managing print jobs by department.
Step-by-step guide for replacing toner containers and checking their lifespan.
Instructions for replacing the waste toner box, essential for printer operation.
Procedures for cleaning the printer's internal components for optimal print quality.
Basic troubleshooting steps and tips for common printer problems.
Solutions for issues affecting print quality like skewed colors or blank output.
Explanations and corrective actions for various error messages displayed by the printer.
Step-by-step instructions for locating and removing jammed paper.
To Next Page
