Vacon NX Active Front End User Manual

6
vacon • 90 Control Keypad
Tel. +358 (0) 201 2121 • Fax +358 (0)201 212 205
Figure 64. Parameter locking
Start-up wizard (P6.5.3)
The Start-up wizard facilitates the commissioning of Vacon
®
NX Active Front End. If active, the
Start-up wizard prompts the operator for the language and application of his/her choice and then
displays the first menu or page.
Activating the Start-up wizard: In the System Menu, find page P6.5.3. Press
Menu button right once
to enter the edit mode. Use the
Browser buttons to select Yes and confirm the selection with the
Enter button . If you want to deactivate the function, follow the same procedure and give the
parameter value
No .
Figure 65. Activation of Start-up wizard
Multimonitoring items (P6.5.4)
Vacon NX alphanumeric keypad features a display where you can monitor up to three actual values
at the same time (see Chapter 6.3.1 and Chapter Monitoring values in the manual of the application
you are using). On page P6.5.4 of the System Menu, you can define whether the operator can replace
the values monitored with other values. See Figure 66.
Figure 66. Disabling the change of multimonitoring items
S1  S9
READY
I/Oterm
READY
I/Oterm
READY
I/Oterm
enter
READY
I/Oterm
READY
I/O term
P1

P4
System Menu
Security
Parameter Lock
ChangeEnable
Parameter Lock
ChangeDisabl
Parameter Lock
ChangeEnable
11191.emf
READY
I/Oterm
READY
I/Oterm
READY
I/Oterm
enter
Star tup wizard Startup wizard
No No
Startup wizard
Yes
CANCEL
CONFIRM
11192.emf
READY
I/Oterm
READY
I/Oterm
enter
READY
I/Oterm
Multimon. items
ChangeEnable
Multim on. items Multim on. items
ChangeEnable ChangeDisable
11193.emf

Vacon NX Active Front End Specifications

General

Brand	Vacon
Model	NX Active Front End
Category	Controller
Language	English