VADDIO RoboSHOT 30 - Quick-Connect USB Telnet Serial Command API; Telnet Command List

RoboSHOT HD Camera Systems
RoboSHOT HD Cameras - Document Number 342-0794 Rev C Page 58 of 68
Q UICK -C ONNECT USB T ELNET S ERIAL C OMMAND API
The Telnet API for the Quick-Connect USB is similar to, but not identical to the RoboSHOT Telnet API. Some of
the differences include the IP and USB 2.0 streaming sections as well as a few others. Telnet sessions will require
access verification and uses the same username and password associated with the Administrator account on the
embedded web server. The default Telnet Port is 23. Command lines are terminated with a carriage return.
Telnet Command List

CameraHome
 NAME
camera home - Move the camera to the home position
 SYNOPSIS
camera home
 DESCRIPTION
Method used to move the camera to the home position
 EXAMPLES
camera home
Move the camera back to the home position
CameraPan
 NAME
camera pan - Pans the camera left or right
 SYNOPSIS
camera pan {left|right|stop} [1-24]
 DESCRIPTION
Method used to pan the camera
 OPTIONS
left Move the camera left
right Move the camera right
stop Stop the camera movement
speed Optional integer from 1-24 that represents the speed (Default: 12)
 EXAMPLES
camera pan left
Pans the camera left at the default speed
camera pan right 20
Pans the camera right using a speed of 20
camera pan stop
Stops the pan movement of the camera

CameraPreset
 NAME
camera preset - Recall and storing of camera presets
 SYNOPSIS
camera preset {recall|store} [1-6]
 DESCRIPTION
Method used to recall and store camera presets
 OPTIONS
recall Recall preset
store Store preset
preset Required value from 1-6 used to indicate the preset number
 EXAMPLES
camera recall 3
Move camera to preset position 3
camera store 1
Store current camera position as preset 1



Ima
g
e: Invi
g
oratin
g
simulated Telnet session.