3.1.2.2 Alert indicator
Alert indicator shows the presence of active alerts. The colors of the indicator change
according to the severity of the most severe currently active alert:
Light gray background:
no active alerts.
Orange background:
gas caution or device warning active.
Red background:
gas alarm or device error active.
Select the alert indicator to open the Alerts page.
3.1.2.3 Messages
User interface of the DGA monitor will display important information as messages at the top of
the user interface.
• Alert summary: A summary of currently active alerts is shown when a user logs in to the
user interface. If any alerts are active, proceed to the Alerts page to look up detailed
information about the alert(s).
• Changes to DGA monitor settings: Success or failure of a settings change is indicated
with a message.
• Other notifications: Any other messages from the DGA monitor. For example, a message
will be shown when a new measurement cycle has been completed.
Chapter 3 – User interface
33
To Next Page
Loading...