3. Enter a name for the device into Name. Maximum length is 64 characters. You can use
alphanumerical characters, space, hyphen "-", and underscore "_".
4. Select Apply to save the name.
More information
‣
Connecting to user interface (page 30)
3.5 Setting date and time
Figure 27 Date and time settings page
DGA monitor uses UTC (Coordinated Universal Time) internally. Time and time
stamps in the user interface are shown according to the time zone of the
connecting web browser.
1. Connect to the user interface as the Admin user.
2. In the user interface, select Settings > General.
Chapter 3 – User interface
49
To Next Page
Loading...