Vaisala Optimus OPT100 - Figure 39 Configuring Offsets in Measurement Settings

Figure 39 Configuring osets in measurement settings
• Apply saves changes.
• Undo returns to previously applied osets.
• Clear removes configured osets.
1. Go to Settings > Measurements > Oset.
2. Calculate osets. Osets can be increments or decrements.
New oset is applied to the original measured values, not previously oset
values.
3. Fill values into all Oset fields.
4. Select Apply to save changes.
After applying the settings, you cannot return to the previous osets. The
previous osets can be viewed in the data file.
To download history data, go to Measurements > Latest values > Download
Data.
Chapter 3 – User interface
65