6. Select Upload to send the file to the DGA monitor.
7. DGA monitor verifies that the file was received successfully, and starts the update. The
update may take up to 30 min. When the process is complete, a user interface message
will show the result of the update.
Do not power o the DGA monitor during the update. Do not
attempt to reconfigure the DGA monitor, generate a diagnostic data
package, or use any other functions of the user interface until the update is
ready.
CAUTION!
While waiting for the update to complete you may lose connection to the
user interface, or receive a message indicating that the update has failed.
This may happen because your browsing session expires or due to a network
connectivity problem, and does not necessarily mean that the upgrade has
actually failed. To continue from this situation, close the browser window, and
reconnect to the user interface as the Admin user.
8. Verify that the new software version is displayed as the current software version on the
Software update page. This means the software update has been successful.
9. Verify the current Settings of the DGA monitor. The software update may have added
new settings or changed existing ones.
10. Switch the DGA monitor back to Measuring mode to continue normal measurement by
starting measurement.
OPT100 User Guide M211858EN-U
72
To Next Page
Loading...