Vaisala PTU300 - GPS Commands

USER'S GUIDE____________________________________________________________________
106 _________________________________________________________________ M210796EN-F
Output format:
>send
$PASHS,XDR,P,0.99710,B,S1630001,C,22.47,C.S1630001,H,20.84,
P,S1660001
>
Example:
"$PASHS,XDR,P," 1.5_P_",B,,C,"_3.2_T_",C,,H,"_RH_",P,"_#r_#n_
Output format:
>send
$PASHS,XDR,P,1.01148,B,,C, 27.11,C,,H, 54.29,P,
>
GPS Commands
The PTU300 transmitter responds to following GPS specific application
commands.
*0100P9<cr>
Example:
>*0100P9
$PASHS,XDR,P,1.03384,B,A2100012,C,22.28,C,A2100012,H,39.65,
P,A2100012
>
*0200P9<cr>
Example:
>*0200P9
$PASHS,XDR,P,1.01496,B,T5030004,C,24.42,C,T5030004,H,41.18,
P,T5030004
>
*9900P9<cr>
Example:
>*9900P9
$PASHS,XDR,P,1.01496,B,T5030004,C,24.42,C,T5030004,H,41.18,
P,T5030004
>