USER'S GUIDE____________________________________________________________________
72 __________________________________________________________________ M210796EN-F
Information Display
The information display contains current settings and status of the device.
You can open the display by pressing the left function button INFO in
the basic display. The following information will be shown:
- Current sensor operation (for example, chemical purge), if any, in
progress
- Present or past unacknowledged errors, if any
- Device identification; product name, version and serial number
- Adjustment information (the latest date, user made adjustments)
- Measuring settings
- Information on chemical purge settings (when applicable)
- Display Alarm settings
- Serial interface information
- Network settings and status of the LAN or WLAN interface
(when applicable)
- Analog output information
- Relay output information (when applicable)
0706-002
Figure 43 Device Information on Display
To access all this information, press the left function button MORE as
many times as needed. You can also press the left/right arrow buttons to
browse through the information.
To exit the display, press the right function button OK.
To Next Page
Loading...
