Vaisala PTU300 - Figure 56 Web Configuration Interface for WLAN; Terminal Program Settings

Chapter 4 ________________________________________________________________ Operation
VAISALA_______________________________________________________________________ 91
1102-017
Figure 56 Web Configuration Interface for WLAN
Terminal Program Settings
The instructions below describe how to connect to the PTU300 using the
PuTTY terminal application for Windows. Perform the necessary cabling
and configuration of the transmitter before following the instructions.
PuTTY is available for download at www.vaisala.com.
NOTE
PuTTY cannot be used to access the transmitter through the User Port if
the transmitter is configured to use the MODBUS protocol. However,
you can always use PuTTY to access the transmitter through the
Service Port.