Chapter 8 ____________________________________________ Sensor and Data Message Settings
VAISALA______________________________________________________________________ 105
Replace the maximum wind direction (Dx) and speed (Sx) with average
wind direction (Dm) and average wind speed (Sm):
0WU,R=&01001000<cr><lf>
0WU,R=11110000&01001000<cr><lf>
Remove the heating temperature (Th) data from the composite data
message, and include the information field (Id):
0SU,R=&00001000<cr><lf>
0SU,R=11110000&00001000<cr><lf>
The final composite data message query and response in ASCII:
0R0<cr><lf>
0R0,Dm=009D,Sm=0.2M,Id=HEL___<cr><lf>
To Next Page
Loading...
