Vaisala WINDCAP WMT52 - Chapter 8 Sensor and Data Message Settings; Wind Sensor; Checking the Settings (Awu)

Chapter 8 ____________________________________________ Sensor and Data Message Settings
VAISALA_______________________________________________________________________ 95
CHAPTER 8
SENSOR AND DATA MESSAGE
SETTINGS
This chapter presents the sensor configuration and data message
formatting commands for all communications protocols: ASCII,
NMEA 0183 and SDI-12.
Sensor and data message settings can also be done by using the Vaisala
Configuration Tool software.With this software tool you can change the
device and sensor settings easily in Windows® environment. See Table
18 on page 118.
Wind Sensor
Checking the Settings (aWU)
With the following command you can check the current wind sensor
settings.