Vaisala WINDCAP WMT52 - Supervisor Settings; Table 21 General Unit Settings

Appendix E ______________________________________________________ factory configurations
VAISALA______________________________________________________________________ 139
Supervisor Settings
0SF!0SF,t=19.8,b=17159,l=-50.0,m=4.0,h=10.0<cr><lf>
Table 21 General Unit Settings
Field Character Field Name Description
t Heat control calibration temp. -50.0...+60.0 °C (calibrate to Ta)
b Direct ADC value of temp.diode 0...4096
l Defrosting limit w. 50% duty
cycle
-100.0 ...[m] °C (default -4.0 °C)
m Heating limit w. full power [l]...[h] °C(default 0.0 °C)
h Heating limit w. 50% duty cycle [m]...100.0 °C (default 4.0 °C)