ii
Force 2 Service Manual
The following service instructions are for use only by personnel qualified
to repair and service the equipment described in this manual.
This service manual covers the installation and basic service instructions
for the Force™ 2 Electrosurgical Generator. Also included are sections
covering the technical specifications, circuit descriptions, and the testing
of the generator. Instructions for use and cautions and warnings
concerning electrosurgery are in the
Force™ 2 Electrosurgical Generator
User’s Guide
supplied with the generator.
Equipment covered in this manual:
The
Force™ 2 Electrosurgical Generator Service Manual
consists of two
parts—the text (part 1 of 2) and a Schematics Supplement (part 2 of 2)
which contains the schematics.
Valleylab part number:
945 103 106 (1 of 2)
Effective date:
October 2004
Force™ 2 and REM™ are trademarks of Valleylab.
The Force 2 generator is protected by one or more of the following U.S.
patents and their foreign counterparts: 4,632,109, 4,658,819, 4,658,820,
4,827,927, 5,190,517.
Manufactured by
Valleylab, a division of Tyco Healthcare Group LP
Boulder, CO 80301-3299 USA
Tyco Healthcare UK Ltd.
Gosport, PO13 0AS, UK
For information call
1-800-255-8522 / 1-303-530-2300
© 2004 Valleylab All rights reserved.
Made in USA
Printed in USA
Caution
Federal (USA) law restricts this device to sale by or on the order of a physician.
Electrosurgical Generator Vac Nominal Hertz
Force™ 2-2 PCH 110-120 50-60
Force™ 2-8 PCH 220-240 50-60
To Next Page
Loading...
