~ 24 ~
COM3000 Integrator’s Installation Manual
8.5 COM51 FEATURE LICENSES
If you are using a COM51 system in an IPTV system with no QAM or NTSC-8 the
cards will need to be licensed for use by your distributor.
Allows all channels to be in clear QAM (no Pro:Idiom)
Allows streaming to Transcoders using “Transcode” security setting
Transcode manufacturer ID. 1= Video Propulsion; 2=Blonder-Tounge
Licenses COM51 to run Mediatune software (includes 10 MMS)
Additional IPTVs for Mediatune MMS (Multicast Media Server)
Licenses COM51 to run Flextune software (one COM51 card per system)
Enables HD channels to be streamed. Enabled by default, except on COM46
FLEX
Enables video to be streamed to any device. Enabled by default except
COM46A and COM51A.
Symptoms of no IP license:
•
All tuners will work after re-boot, after several minutes all tuners other than the first tuner will stop. COM51 card
will display tuners >1 in red.
•
Syslog will report, “No QAM found need license”.
Loading a COM51 license file overwrites any existing license in the card. Any new license file must contain any
existing license features.
To Next Page
Loading...
Need help?
General