~ 38 ~
COM3000 Integrator’s Installation Manual
The Info section, shown below provides a view of many key indicators to the operation of the
COM51 card.
A concise index to the characteristics of each individual COM51 card according to its status and
user-defined settings.
Following is a brief explanation of each field shown above:
This field represents which COM400 chassis the card resides in when there are multiple chassis in
the system.
This field identifies the card’s location within a chassis, numbered 1 through 6.
This field identifies the tuner’s location on the COM51 card (1 through 23).
Field shows the IP address of the COM51 card.
Reports the Receiver ID, or RID. This value is the first of two parameters required to obtain
authorization on the DIRECTV network.
Reports the CAM ID. This value is the second of the two parameters required to obtain
authorization on the DIRECTV network.
This field displays the DIRECTV network of the currently tuned channel. This number correlates to
a specific satellite and can be used in conjunction with the Frequency Index field below to
determine what satellite and transponder the tuner is using for the channel tuned
This field reports the frequency index as reported in the DIRECTV guide data.
To Next Page
Loading...
Need help?
General