vantiva COM3000 User Manual

~ 42 ~
COM3000 Integrator’s Installation Manual
Date: January 2024
Version 1.1
NTSC-8_IP
Enter the IP address of a NTSC-8 to be fed from this COM51 card.
NTSC-8_tunercount
COM51 cards will stream 1-23 tuners to NTSC-8.
Enter the number of tuners you are using for NTSC-8s. One COM51 card will stream 23 channels and
a program guide to NTCS-8. (see NTSC-8 integrators manual)
Note: Blonder Tounge NTCS devices require a dash prefix (-XX) for tuner count.
UtilConfig
This field is for development purposes only and should be left blank unless you have been asked to
modify the value by someone from technical support.
Misc Get/Set
This function is used for multiple purposes. Entries are case sensitive.
Name
Value
Description
siteKey
64 bit hex
Pro:Idiom mobile key (write only value)
random
Displays a random 64 bit site key
factoryReset
1
Resets COM51 to factory settings. All feature and tuner licenses are lost
ping
Enter IP address
Result in syslog
COM51 user.warn syslog: a: server=(192.168.10.2)
COM51 user.warn syslog: a: 192.168.10.2 is alive!
tunerCount
Displays licensed tuner count
bitrate
0-22
Returns bitrate of specified tuner index
blackout
0-22
Reports blackout by tuner index
ccErrors
0-22
Reports CC errors by tuner index
keyIndex
Manufacturer index for VP transcode = 1
Blonder Tongue = 2
mms
Mediatune MMS license count
updateBitrate
UCW4026MCS Software update Mbps
updateCount
UCW4026MCS software Update Iterations
HoursEvents
set to 1 to activate
0 to remove
Enables hidden fields in the EPG tab to set HoursEvents and HoursDetails
videoTimeout
255 no video signal message (blue screen) set to 250 disables screen
igmpQuery
1
Sets COM51 to be IGMP querier when Flextune is enabled.
Title
1
Adds text to the COM51 header.
help
Shows all available commands
Commented [SR1]: NTSC-8_tunercount left justified
Commented [AP2R1]: fixed

vantiva COM3000 Specifications

General

Brand	vantiva
Model	COM3000
Category	Switch
Language	English