MENU SYSTEM : MAPPING
4
02.9671.0001 C 17-Sept-01 63
DMX DMX Accesses functions for setting DMX mode or pan/tilt options (1st level menu) or
sets starting address for luminaire in DMX systems (Addr).
Dnld Download Downloads program to luminaires.
DSEQ Delete Sequence Deletes cue sequence.
E 16 Enhanced 16-bit Configures luminaire for operation in enhanced DMX 16-bit mode.
E 8 Enhanced 8-bit Configures luminaire for operation in enhanced DMX 8-bit mode.
Enab Enable Enables a function.
Encr Encoders Accesses encoder choices for diagnostic testing.
FAIL Test Fail Indicates that sensor test has failed.
FHrs Fixture Hours Displays total number of hours luminaire has been powered on.
Fixt Fixture Access luminaire specification information such as model, serial number,
software version, along with status information and download function.
FLTM Follow Time Accepts value for cue follow feature.
FTim Focus Time Accepts timing value for focus time.
InvP Invert Pan Reverses pan action for special focus requirements.
InvT Invert Tilt Reverses tilt action for special focus requirements.
ISEQ Individual Sequence A sequence playback mode which will play the cues from each individual
luminaire, if any. (In ISEQ, if the number of cues is different, it will only play as
many as each luminaire has stored. The follow time is taken from the master
luminaire.)
ITim Intensity Time Accepts timing value for intensity fade time.
L ON Lamp is On Configures arc luminaire so that lamp will strike upon power up.
LAMP Lamp Accesses lamp power up options and information (CFG) and sets beam for lamp
alignment adjustment (TEST).
LHrs Lamp Hours Displays total number of lamp operating hours.
LId Luminaire ID Displays unique ID number for the luminaire which is used by Virtuoso consoles
to identify the unit (in two pages).
LOFF Lamp is Off Configures arc luminaire so that lamp will await manual command before striking.
MAG Magenta Specifies manual control of Magenta (Man) or test Magenta functions (Test).
Man Manual Commands Accesses functions for controlling luminaire mechanisms and timing by entry of
an absolute data value.
Mod Modify Cue Accepts cue number of cue to modify from cue list.
MODE DMX Mode Accesses functions for setting DMX mode to standard or enhanced 8-bit or 16-
bit.
Modl Model Displays model number of luminaire. For example, 2413 (VL2413).
Move Move Enables and disables pan and tilt movement and auto-correction.
MSEQ Master Sequence A sequence playback mode which will replay the cues from the master luminaire.
NoPG No Program Indicates that there is no software present in the luminaire.
OFF Off Turns off a function.
OK Okay Calibration has completed and no errors have occurred.
OK? Okay? Prompt for pressing [Enter] before an action is executed.
ON On Indefinitely Sets Menu Display to stay on until programmed otherwise (DisP) or turns on a
function.
P UP Lamp Power Up Accesses options for lamp power up: on, off, or on after calibration.
Table 4-3: Menu Function Definitions (Continued)
Display Definition Purpose
To Next Page
Loading...
